No Saint Sub 7kilos

[dualcontrol]

Hello everybody:daumen:
I present me. Julien, age 18, lover of the light. I come from Belgium.
I like very much this complete and stunning forum!
I present you my MOUNTAIN BIKE.
It is a frame No Saint 1001 gr
"]http://imageshack-france.com/out.php/t135460_bv.JPG (http://imageshack-france.com/out.php/i135460_bv.JPG)

[dualcontrol]

http://imageshack-france.com/out.php/t135214_Photo082.jpg (http://imageshack-france.com/out.php/i135214_Photo082.jpg)
http://imageshack-france.com/out.php/t135217_Photo083.jpg (http://imageshack-france.com/out.php/i135217_Photo083.jpg)
http://imageshack-france.com/out.php/t135220_Photo081.jpg (http://imageshack-france.com/out.php/i135220_Photo081.jpg)

[/URL]
[URL="http://imageshack-france.com/out.php/i135460_bv.JPG"]http://imageshack-france.com/out.php/t135460_bv.JPG (http://imageshack-france.com/out.php/i135220_Photo081.jpg)

[dualcontrol]

The Next upgrade are
Titanium-aluminium and plastic bolt
1 Furious Fred for Front
Clavicula cranks
Schmolke or Ax Lightness Seatpost
SID Worldcup Rollin Green
Extralite tape
KCN cassette
Wheels ZTR Race/ Tune Prince Princess+ Tune Skyline
Front Derailleur custom
Excuse my bad english:(
I replaced KCNC pulleys for carbon pulleys
http://img70.imageshack.us/img70/7839/derailleurrp3.th.jpg (http://img70.imageshack.us/my.php?image=derailleurrp3.jpg)
My purpose is for the moment to pass under 7kilos
Later I want to approach 6700gr.
I give you the detail for the moment:
No saint 1001
SID Worldcup Athena
Wheels Ztr Olympics/ FRM
Tune Concorde saddle
Schmolke TLO handlebar
Extralite Stem
Magura Marta SL
Stan disc
Furious Fred/ Twister Supersonic
Xpedo ti ti pedals tunned 166gr ( I have cut 1 face )
X.o Twister
X.o tunned
Xtr crank with tiso bolt
Dura ace cassette
KMC X9 sl Gold chain

[mani]

Welcome to us:)

What size is the Frame?
Whats the weight for the moment?
I have also a No Saint Frame but my bike is much more heavier.
I think it has about 8,5 Kilos.
And your Frame is much more beautifull :love:
Is that the "spezial" etition with no decals? I called Borni but they told me that this frame is sold out and they don't know if they get frames like this.

Enjoy riding with your bike :cool:

[XTR_Chris_XTR]

nice bike!:daumen:

you only change the pulleys at the rear derailleur? Or you also change some screws? 172g are a really good weight


And a KCNC cassette would not be my first choice....

[dualcontrol]

Thank you for your comments:daumen:
The frame is without decals and that's a 17" Size. When I commanded, I explained that I looked for a quite black frame.I had the pleasant surprise to receive one from it.
The weight of the cycle is for the moment 7.4 kilos but with a of very heavy seatpost (304gr:wut:) .I wait for one of news. Wheels are not heavy but not reliable and not stiff (ZTR / FRM) .
For the derailleur.
I changed pulleys and I placed two alu bolt (gold).
I also want to place a screed carbon and plastic bolt :)
I hope to be under 160 gr after modifications:daumen:

[dualcontrol]

I have a 31.6X300mm very light seatpost but I want a 400mm for my frame !
The seatpost: 31.6X300 109 gr (Handmade)
http://img410.imageshack.us/img410/8667/dsssh7.th.jpg (http://img410.imageshack.us/my.php?image=dsssh7.jpg)
http://img530.imageshack.us/img530/7692/y1pl2y0r2r76kf6vu4hhry0hc6.th.jpg (http://img530.imageshack.us/my.php?image=y1pl2y0r2r76kf6vu4hhry0hc6.jpg)
http://img293.imageshack.us/img293/2227/y1pl2y0r2r76keuokaikml9oc3.th.jpg (http://img293.imageshack.us/my.php?image=y1pl2y0r2r76keuokaikml9oc3.jpg)

[CrashOversteel]

Wow, nice bike and nice weigth. :daumen:

But why do you want to change the fork in a green SID? I think the Athena fits realy good.

[dualcontrol]

Thank you!:)
The athèna is very attractive but I want to make a beautiful Black / Green contrast.
I have to replace my grips by Extralite.
You go to see it is going to be well!:daumen:

[Exekuhtot]

Hello,

nice project but I would not take the KCNC cassette, the ohter parts made by KCNC are completely ok, but aluminium cassettes does not work. It will be destroyed after a few hundred kilometres.


Philipp

[Facilitas]

Can you tell me who has crafted you Seatpost. And is he or she able to craft some Seatposts with 34,9 Diameter.

[kdanny1]

schön, einzig der entlabelte rahmen gefällt mir nicht so.
gewicht is geil! echt ein klasse rad!

[dualcontrol]

Hello,

nice project but I would not take the KCNC cassette, the ohter parts made by KCNC are completely ok, but aluminium cassettes does not work. It will be destroyed after a few hundred kilometres.


Philipp
Yes, cassette KCNC are not long-lasting but if I want to be under 7kilos, I have to have one of it!:lol:

[dualcontrol]

Can you tell me who has crafted you Seatpost. And is he or she able to craft some Seatposts with 34,9 Diameter.
The person who makes the seatpost makes no more seatpost. But I indeed want to contact him(it) for you, can be indeed that i will make one!:daumen:
300-350 or 400 mm ?;)

[Facilitas]

350 :love::love::love:

[dualcontrol]

350 :love::love::love:
Ok, I send a email :daumen:

[Facilitas]

Thanks dude :daumen:

[Tuner]

If you ever want to sell the SID Athena, let me know!! PLEASE!

Stefan

[mithrandir]

Very nice bike in black... enjoy!!
What's your view on the Tune Concorde?

[dualcontrol]

If you ever want to sell the SID Athena, let me know!! PLEASE!

Stefan
Sorry my friend but her is sold:frown:
But if you really want an Athena, I know a person who has it one. Give me your price(prize) in MP:daumen:

[dualcontrol]

Very nice bike in black... enjoy!!
What's your view on the Tune Concorde?
The tune Concorde is really comfortable!
It is the model MTB (reinforcement in Kevlar).
The integrated rails give a good flexibility of the hull(shell)!
Before, I had Speedneedle. I prefer Concorde!:D
I paid mine 145€!:love:
If you want one at good price(prize), you can look on Ebay! There is a lot for the moment!:daumen:
Caution! There is a lot of model for the road. (Full carbon).
You do not have to buy because the beak of saddle is really too fragile!

[mithrandir]

The tune Concorde is really comfortable!
...
If you want one at good price(prize), you can look on Ebay! There is a lot for the moment!:daumen:

Thanks so far. I've seen already!!

[dualcontrol]

Héhé SID Rollin on the bike !:daumen:

http://imageshack-france.com/out.php/t162123_037.JPG (http://imageshack-france.com/out.php/i162123_037.JPG)

[kdanny1]

great, i ever would have the lime-green sid on my bike! casting is by me, the bike is saled:(;)

[dualcontrol]

great, i ever would have the lime-green sid on my bike! casting is by me, the bike is saled:(;)
Thanks for the comment :daumen:

[kdanny1]

Thanks for the comment :daumen:

by your bike its great!!:love:
look by me: http://www.light-bikes.com/bikegallery/BikeListing.asp?id=752
the scott names are yellow, that comes not so good.

but a black bike with the lime green casting is PERFECT!!:love::love:

[dualcontrol]

by your bike its great!!:love:
look by me: http://www.light-bikes.com/bikegallery/BikeListing.asp?id=752
the scott names are yellow, that comes not so good.

but a black bike with the lime green casting is PERFECT!!:love::love:
:eek: Very nice and very light bike ! Congratulations !
I like it !
I wait for a Clavicula or a Powerarms. The Powerarms is good ?
And for the fork..what's Xtremelight ?
Thanks :daumen:

[kdanny1]

:eek: Very nice and very light bike ! Congratulations !
I like it !
I wait for a Clavicula or a Powerarms. The Powerarms is good ?
And for the fork..what's Xtremelight ?
Thanks :daumen:

thanks, but the bike is saled. i need the money for my son:love: and for my rr. the mtb was never ride and stay many time in the garage/living room:D

powerarms with the xx-light bottom was good! no problems with these parts.
the fork is tuned by xtremelight(a user from mtb-news) and mmm-bikes. xtremelight make some light parts for me, the ultralight handmade cfk-clamp i use by the rr.

i am happy to see more pictures from your bike, really nice:daumen:

[dualcontrol]

Hi !:daumen:
I have bought a aluminium cassette : 142 gr for one 11-32
Attache rapide : FRM Pro: 62gr
Boitier de pédalier XTR 07: 81gr
Cablerie Shimano White: 30gr
Cadre No saint carbon: 1001gr
Cassette: Alu 11-32: 142gr
Chaine: KMC X9 SL Gold :234gr
Cintre: Schmolke TLO 68gr
Collier tds: Extralite: 13gr
R Der: X.O + galets carbon + vis alu : 172gr
F der: Shimano Dura-ace triple : 130gr
Entretoise: /
Fond de jante: 10gr
Fourche: Rockshox Sid Wcup Rollin Green Tunned : 1186gr
Freins: Magura Marta SL + plaquettes : 427gr
Jdd: 58gr
Jdd cap's: Schmolke carbon 4gr
disque: Stan 126gr
Manette+cable: 188gr
Pédales: X-pedo Ti/ti modifié 166gr
Pédalier: Shimano XTR/tiso : 695gr
Pneus: Continental Twister 342gr+ Schwalbe FF 315gr :657gr
Poignée: Extralite: 12gr
Potence: Extralite Ultrastem :93gr
Protège base: 3M: 10gr
Roues: ZTR/FRM: 1406gr
Selle: Tune concorde MTB: 59gr
Tige de selle: Lyre carbon 140gr
Valve notubes : 14gr
Latex: 80gr
7264gr




Final project
Tune Skyline MTB -38gr
Cassette KCNC 11-27 -30gr
Collier BTP carbon: -8gr
Chape externe dérailleur arrière carbon - 7gr
Collier BTP + visserie alu + modification de la chape: -35gr
Tunning fourche by MMM-bike -180gr
Clavicula + plateaux Fibre Lyte (446+15+25+40) soit 526gr complet contre 776gr d'xtr soit -250gr
Deuxieme Furious Fred : -30gr
Ztr Race/tune Prince-Princess -200gr

7264gr -778gr = 6486gr

[dualcontrol]

http://imageshack-france.com/out.php/t171203_stickers.jpg (http://imageshack-france.com/out.php/i171203_stickers.jpg)
:)
New pictures when I recieve the new Seatpost

[CrashOversteel]

Hi,
at first I thought that it would not look good with the green SID, but now I see it and with this green decals it fits realy well. :daumen:

You can spare some grams with an KMC X10 SL round about 20g and it works.

[dualcontrol]

Hi,
at first I thought that it would not look good with the green SID, but now I see it and with this green decals it fits realy well. :daumen:

You can spare some grams with an KMC X10 SL round about 20g and it works.
Thank you for your comment:daumen:
No problem in the mud? It is interesting!:)

[dualcontrol]

I have my new seatpost : 31.6X400:132gr
And my new saddle: M2 Racer 43gr
http://img120.imageshack.us/img120/5527/020cl6.th.jpg (http://img120.imageshack.us/my.php?image=020cl6.jpg)
http://img380.imageshack.us/img380/4870/025ce5.th.jpg (http://img380.imageshack.us/my.php?image=025ce5.jpg)

[CrashOversteel]

I hope for you that the M2Racer saddle is not to light. 43g is amazing :eek:

Btw: you could change the seatclamp into a carbonclamp, it would spare you about 10g to the Hope.

[mithrandir]

And my new saddle: M2 Racer 43gr
Whow!!! Can you tell something about this mega-light saddle compared with the Concorde?

[dualcontrol]

The seaclamp is a Extralite.
The weight is 12gr.
After , I want a BTP (5gr):love:

I do not still have to test the saddle.
My older Concorde was very comfortable!
Tomorrow I leave for a raid . I shall say to you my conclusion :daumen:

[CrashOversteel]

The seaclamp is a Extralite.
The weight is 12gr.
After , I want a BTP (5gr):love:

Oh ok, but there are some buddys in the community (coparni, Mr.Hyde) who can made some lighter seatclamp than the btp (I think one of the lightest was about 3.6g). Normal 5g seatclamps can they make cheaper and better looking than btp.

[dualcontrol]

Oh yes, it's a good idea ! Thanks CrashOversteel.
I wait for nylon cables and kevlar for my transmission.
They are cables for fishing with a resistance of 150kilos

[mithrandir]

I do not still have to test the saddle...
Btw, what's the news about the M2 saddle?

[dualcontrol]

I came back from a Marathon with the saddle. Light and comfortable! I am not heavy thus I can not say if she(it) is convenient for everybody.
The hull(shell) is very flexible. Negative points: edges are sharp edge. When I am behind the saddle and when I return, I often hang on(collide) the cycling shorts.
Very fragile (a friend broke his during a transport)

[Tuner]

Do you need plastic housings for your cables too? I´ve got some meters of them.

Stefan

[dualcontrol]

Oh yes I want it!
I send you a MP :daumen:
Thanks !:lol:

[dualcontrol]

Tune Skyline arrived
I begin the lowering of my Marta. I again have to solve a small problem of join.
http://img360.imageshack.us/img360/3307/005gr2.th.jpg (http://img360.imageshack.us/my.php?image=005gr2.jpg)
7198gr
Wainting :ti bolt for disk