Trek Top Fuel 110 (9kg)

[Fuel110]

I introduce my 9kg Top Fuel to you.

[Fuel110]

list of components and photo on balance (with detail of measurement)

[Weight Weenie]

2 Rotors 98 gr.???

[Fuel110]

2 Rotors 98 gr.???


yes. 49g each
the rotor is the Tsunami model from USA.

[grey hound]

wellcome to the forum !

amazing bike with top weight, although I wouldn´t like to ride that rotors and KCNC alu cassette.

You can "catch" some more gramms using another saddle and seatpost,
so You can get below 9kg!

[Fuel110]

wellcome to the forum !

amazing bike with top weight, although I wouldn´t like to ride that rotors and KCNC alu cassette.

You can "catch" some more gramms using another saddle and seatpost,
so You can get below 9kg!

Thanks.

in my opinion KCNC cassette is a good components; it works very well with a "fluid" gearing; the design and building of teeth is accurate.
Different is the evaluation of Al rotors; I use these discs only along flat tracks because the bracking performance in downhill is very low.

The next upgrades will be an AX saddle with a weight saving of approx. 50-60g and a new 10g seat binder (M2R or similar). It means a Sub9 bike.
At this moment I have not intention to change the seatpost (I'd like an AX Daedalus) because at the end of the year I will buy a new frame (Scott Spark maybe with integrated seatpost). So I prefer wait and avoid useless purchase.

[grey hound]

I understand.

with a spark frame You will achieve less than 8,5kg easily using Your components.

[promises]

but he will fuck up his handling/geometry with a spark frame and the frm fork.
85 on the front and 110 on the rear wont work properly!

[Fuel110]

I understand.

with a spark frame You will achieve less than 8,5kg easily using Your components.

Considering that the weight of Spark frame is less than 1,8kg and the weigth of my Top Fuel frame is approx. 2,5kg, I will have a bike of 8,3 kg.

With AX seatpost (and shim), AX saddle and 10g seat binder, the weight should be 8,1-8,2kg.
I have an other "dream": "Clavicula dp" carbon fiber crank from THM-Carbones..... for a sub8 bike.

[Fuel110]

but he will fuck up his handling/geometry with a spark frame and the frm fork.
85 on the front and 110 on the rear wont work properly!

we have to consider that the FRM fork has not sag with the biker onboard; the reba with 100 travel (mounted on spark limited) is not different in geometry.

in addition to that, the spark suspension has three travel mode; only the all travel mode has 110mm and the traction control mode (probably the most used) has 70mm.

based on these consideration, do you have the same opinion?
if yes, do you have suggestions?

[promises]

Iam riding a Spark and I had my Reba travelled at 85mm and after some rides I switched to 100mm and it feels more comfortable for me.

but you have to try it and it's your choice.
if it feels comfortable for you then it's okay!!

[divergent!]

hi.

pillar titanspokes? are the spokes durable?

[Fuel110]

hi.

pillar titanspokes? are the spokes durable?

yesterday, after 5 months, I broken my first spoke!

[divergent!]

ok. this can happen. my cx ray where broken 3 times. but i think it was a problem with the metal because they where broken at the head.

i like the color of titanspokes. are the wheels stiff enough?

[Fuel110]

ok. this can happen. my cx ray where broken 3 times. but i think it was a problem with the metal because they where broken at the head.

i like the color of titanspokes. are the wheels stiff enough?

I had a set of Xmax SLR, and in my opinion the Ultradisc TNT are stiffer than Xmax

I broken the spoke after the replacement of my rear ZTR rim ill-treated as in photo (30m of a steep downwill without tire)

[Lateralus]

I`m interested in the frame in the picture. Can you tell me the corresponding brand?

[Fuel110]

I`m interested in the frame in the picture. Can you tell me the corresponding brand?

FUJI.
If I remember, the same frame is in the catalogues of Ghost, No Saint (Max Ari R), Tomac, and FRM

[Lateralus]

Ah ok, thank you. Is the frame available with the pictured white color?

[Fuel110]

Ah ok, thank you. Is the frame available with the pictured white color?

I don't know, Sorry

[Fuel110]

some upgrades
now the weight is 8,75kg
here attached you find photo and list of components